 
Buildings
Engineering Downloads:
Note: Adobe Acrobat Reader is free software to view pdf files and can
be downloaded at www.Adobe.com
Building Specification
| |
“S” Series—PolyStyrene
Panel Building System |
“U” Series—PolyUrethane
Panel Building System |
Materials & Construction
|
Panels—26 ga. Galvanized Steel (ASTM-A653), pre-painted
with polyester, roll formed to produce a patented locking system
with polystyrene foam pressure laminated in between interior/exterior
steel skins |
Panel Frames—Galvanized 16 ga. (ASTM A-653) G90 forming
steel, U-Channel design, Interior/Exterior Sheeting—22-26
ga. Galvalume (ASTM A-792), 20-Year Warranty, Baked on Siliconized
Polyester; Bonded to polyurethane foam and riveted to U-channel
framework
|
Insulation
|
PolyStyrene Foam, Expanded
Laminated under pressure with an adhesive
Thermal resistance value—R-4 per inch
Compressive Strength—10-14 psi
Tensile Strength—16-20 psi
Shear Strength—18-22 psi
STC class—51
Flame Spread—5 (ASTM E84-91a, 4” thick)
Smoke Developed—170 (ASTM E84-91a, 4” thick)
|
PolyUrethane Foam, Closed Cell, Rigid
Pressure Injected into Panel Cavity
Thermal resistance value—R-7 per inch
Compressive Strength—23 psi
Tensile Strength—21 psi
Shear Strength—19 psi
|
Panel Thickness
|
3, 4, or 6” Thick
|
3, 4, or 5” Thick |
| Panel Density |
1lb./cubic foot
|
2 lbs./cubic foot
|
| Panel Increments |
4’ standard—Custom widths welcome |
3’ standard—Custom widths welcome |
| R-Value Insulation |
R-12 in 3” Thick Flat Embossed 26 ga.
R-16 in 4” Thick Flat Embossed 26 ga.
R-24 in 6” Thick Flat Embossed 26 ga.
|
R-23.23 in 3” Thick R-Panel (1-3/4” Hi-Rib fill)
R-30.23 in 4” Thick R-Panel (1-3/4” Hi-Rib fill)
R-37.23 in 5” Thick R-Panel (1-3/4” Hi-Rib fill)
|
| Building Trim |
.050” Extruded Aluminum (ASTM A-6063-T6) or 24-26 ga. Galvalume®
steel material |
24-26 ga. Galvalume® steel material |
| Corner Posts/Angles |
.093”, Extruded Aluminum (ASTM A-6063-T6 |
16 ga. Galvanized (ASTM A-653) G90 forming steel
|
Wall Panel to Roof Panel Connection
|
.055”, Extruded Aluminum (ASTM A-6063-T6) or 16 ga. galvanized
steel (ASTM A-653) G90
|
16 ga. Galvanized Steel (ASTM A-653) G90
|
Wall Panel to Concrete
Connection |
.055” Extruded Aluminum bottom thermal channel for foundation
anchoring purposes |
12 ga. galvanized steel sill angle for foundation anchoring purposes
|
| Wind/Roof Load Capacity |
Up to 150 mph/Up to 72 psf
|
Up to 150 mph/ Up to 160psf |
| Interior Panel Strength |
149.4 lbs.—wall liner strength
76.4 lbs.—ceiling liner strength |
346.2 lbs.—wall liner strength
213.6 lbs.—ceiling liner strength |
| Roof Profiles |
Gable style in 1/2:12, 2:12, & 4:12, & Shed
|
same
|
| Roof Profiles |
10 Years—Structure/Exterior Paint
|
10 Years—Structure
20 Years—Exterior Paint |
Product Applications
|
Control Houses- Electric/Gas Utility, Meter/Pump Houses-Gas
Utility, Battery Cabinets-
Electric/Telecom, Chemical Storage-Various, Water Treatment-Various,
Carports, Porches,
Building Additions, & many more
|
Electrical Cut Sheets
Panel Strength Testing
| |
“S” Series—PolyStyrene
Panel Building System
|
“U” Series—PolyUrethane
Panel Building System
|
Wall Liner Strength Test
|
Screw Tested: (1) #10x3/4” tek screw screwed
into 26 Ga. Galvalume liner
Weight held:
(4) 32.8 lb. concrete block(s)
(1) 18.2 lb. shelf
149.4 lbs. Total Weight
Application: Wall mounted AC/DC Panels, Transfer Switch, Battery
Chargers, etc.

|
Screw Tested: (1) #10x3/4” tek screw screwed
into 26 Ga. Galvalume liner
Weight held:
(10) 32.8 lb. concrete block(s)
(1) 18.2 lb. shelf
346.2 lbs. Total Weight
Application: Wall mounted AC/DC Panels, Transfer Switch, Battery
Chargers, etc.

|
| Ceiling Liner Strength Test |
Screw Tested: (1) #10x3/4” tek screw screwed
into 26 Ga. Galvalume liner
Weight held:
(2) 32.8 lb. concrete block(s)
(1) 10.8 lb. shelf
76.4 lbs. Total Weight
Application: Ceiling mounted ladder tray, heaters, lights, etc.

|
Screw Tested: (1) #10x3/4” tek screw screwed
into 16 Ga. Steel Panel Frame
Weight held:
(6) 32.8 lb. concrete block(s)
(1) 10.8 lb. shelf
213.6 lbs. Total Weight
Application: Ceiling mounted ladder tray, heaters, lights, etc.

|
Doors, Door Hardware, & Window Cut Sheets
Note: More products available than listed)
|
Product Description
|
Picture – if available |
Heavy Duty Door
Brand: CECO
Model: Versadoor
Website: cecodoor.com |
- 1-3/4” Thick
- R-15 Polyurethane Insulated
- 18 ga. Steel Face Plates
- Pre-Installed in 16 ga. Steel Frame
- Drip Caps, Thresholds, and Trim included
- Standard Sizes include- 3’x7’, 6’x7’
double door with custom sizes available
- Available in all colors-Pre-Painted with a heavy duty finish
computer color matched to building exterior
|
 |
Medium Duty Doors
Model: MD-100 & Colonial |
- 1-1/2” to 2” Thick
- R-6 to R-8 PolyStyrene Insulated
- Embossed Aluminum Face Plates
- Aluminum Frame
- With or without 10” safety glass window
- Drip Caps, Thresholds, and Trim included
- Standard Sizes include- 3’x6’-8” & 6’-6’8”
with custom sizes available
- Standard Colors in Tan, Gray, and White
|
 |
Door Hardware
Brand: Transatlantic, Yale, Schlage, Vonduprin, and many more
|
- Keyed Lever Locks, US26D
- Panic Hardware-UL Listed, Wrought Steel, P#ED501
- Closer, Hydraulic, w/ hold open feature
- Hasp lock
- Door Glass, Wire Mesh Security
|
 |
Roll Up Doors
Brand: TracRite
Model: 950
Website: tracrite.com |
- 26-ga. steel door panel w/ 25-year paint warranty
- Minimal Backroom Required
- Live axle: Door Axle rotates in bracket bearing during operation
- Permanently Sealed Ball Bearings for smooth operation
- Various sizes available-10’x12’, 12’x12’,
etc.
|
 |
Windows
Brand: Diamond
Model: 9380
Website: publicsupply.com
Standard size: 28”x36”
(other sizes available)
|
- Single Hung, Single Tilt with Thermal Break
- Vertical Slider
- Tilt in sash for easy cleaning
- 5/8" overall glazing
- Tempered Safety Glass
- Lifetime Warranty
- Factory Installed & Trimmed in Bldg. Color
|
 |
Windows
Brand: Diamond
Model: 9780
Website: publicsupply.com
Standard size: 28”x36”
(other sizes available)
|
- Fixed with Thermal Break
- 5/8" overall glazing
- Tempered Safety Glass
- Lifetime Warranty
- Factory Installed & Trimmed in Bldg. Color
|
 |
Custom Cutouts/Door Hoods/Floors Cut Sheets
HVAC & Heater Cut Sheets
(Note: More products available than listed)
|
Product Description |
Picture – if available |
HVAC
Brand: Marvair
Model: Compac I
Website: Marvair.com
|
- 1-6 ton models with built in 2.2 to 15kw heat
- Auto Changeover Thermostat for Climate Control
- Low Ambient Operation
- High Efficiency
- Factory installed disconnects except on AVP12
- High pressure switch
- Adjustable compressor time delay
- Remote Alarm Capability
- Pleated filters changeable from outside
- Optional LL357A1 Lead Lag Controller- 2 stage heat and cool
with redundant operation
|
 |
HVAC
Brand: Bard
Model: Wall-Mount
Website: Bardhvac.com |
- 1-5 ton models with built in 0 to 20kw heat
- 10.00 to 12.00 SEER
- Barometric Fresh Air Damper
- Motorized Fresh Air Damper
- Commercial Room Ventilator
- Built-in Rain Hood/Top Rain Flashing
- Economizer
- High & Low Pressure Switch
- Compressor Time Delay Relay
- Low Ambient Control
- Alarm Relay
|
HVAC
Brand: Frigidaire
Model: 4YG94
Type: Heat/Cool
Website: Frigidaire.com
|
- Through The Wall Air Conditioner
- BTUH 8000/4200,
- Voltage Rating 115 V
- Current Rating 8.5/12.0 Amps
- High Flow 250 CFM
- Dehumidification 1.9 Pints per Hour
- NEMA Plug Configuration 5-15P
- 14.5”H x 18.5”D x 24”W
|
 |
HVAC
Brand: Frigidaire
Model: 4YG93
Type: Cool Only
Website: Frigidaire.com
|
- Thru The Wall A/C
- BTUH 8000
- Voltage Rating 115 Volts
- Current Rating 8.5 Amperes
- High Flow 250 CFM
- Dehumidification 1.9 Pints per Hour
- NEMA Plug Configuration 5-15P
- 14.5”H x 18.5”D x 24”W
|
Heater
Brand: Qmark
Model: 4E298
Type: Wall Mount
Website: Qmark.com
|
- Electric Unit Heater
- Power Rating 2.2/3 Kilowatts
- Heater Voltage 208/240 Volts
- BTUH 10239
- Current per Phase 10.8/12.5 Amperes
- Air Flow 350 CFM
- Heat Recovery 3UG63
- Phase Single
- Temperature Rise 27 Degrees F Built In 2E569
- 7.5”D x 14”W
|
 |
Ventilation Cut Sheets
(Note: More products available than listed)
|
Product Description
|
Picture – if available |
Fan
Brand: Dayton
Model: 2C710 |
- Shutter Mounted Exhaust Fan
- 115 VAC 60 Hz, Propeller Diameter 12 Inches
- Air Flow @ 0.0 Inch Static Pressure 800 CFM
- 1/30 HP, Full Load Current 1.4 A
- Motor Speed 1550 RPM
- Required Square Opening 13 Inches
- Totally Enclosed, Pole Sleeve Bearing Motor
|
 |
Fan
Brand: Dayton
Model: 5C196
|
- Shutter Mounted Exhaust Fan
- 115 VAC, 60 Hz, Propeller Diameter 36 Inches
- Air Flow @ 0.0 Inch Static Pressure 8225 CFM
- 1/2 HP, Full Load Current 5.6 A
- Motor Speed 825 RPM
- Required Square Opening 37 Inches
- Square Panel Size 39 1/8 Inches
- Totally Enclosed Ball Bearing Motor
|
 |
Fan (Battery Exhaust)
Brand: Dayton
Model: 4C707
Brand: Dayton
Model: 4C707
|
- Battery Exhaust Fan
- Duct Diameter 10 Inches
- Motor Voltage 120 Volts
- Motor Speed 1500 Revolutions per Minute
- Current Rating 1.7 Amperes
- Air Flow 380 CFM
- Grille 13 1/2 Square Inches
- Sleeve Dimension 11 1/2 Square Inches x 5 1/2-9 7/8 Inches
- No Ductwork
|
 |
Thermostat
Brand: Intermatic
Model: 3C952 |
- Single Speed Thermostat
- Voltage Rating 120/240 Volts
- Current Rating 10 Amperes
- Adjustable Temperature 32 to 105 Degrees Fahr.
- Single Pole Double Throw Contact
|
 |
Timer
Brand: Intermatic
Model: 4WZ07
|
- Universal Percentage Cycle Timer
- Voltage Rating 120-240 Volts
- Minimum Time Setting 30 Seconds
- Maximum Time Setting 30 Minutes
- Contact Form SPST
|
 |
Speed Controller
Brand: Dayton
Model: 4YC44 |
- Maximum Current Rating 3 Amperes
- For Use With Aggregate Draw, Axial Roof Ventilator 4YC86-89,
4YC48, 4YC91-93
- Centrifugal Roof Ventilators 4YC64-68, 4YC70, 4HZ32-40, 4HZ42,
4YC72, 4HZ44, 4HZ46, 4HZ48, 4HZ50
|
 |
Delivery Options:
Palletized
# Cost Effective
# Designed for Concrete Pad Application
# Simple Installation Instructions Included
# Sequentially Palletized and Numbered Panels for Quick Field Installation
# Average 3-5 Day Install with 4 men
# Optional Elite Certified Field Installation or Supervision available
Factory Pre-Assembled Floorless
# 10-Year Warranty against Water Penetration
# Saves $ in unnecessary Flooring Costs
# Quick Turnkey Product Delivered to Site
# Designed for Concrete Pad Application
# Assembled on required Temporary, Removable, Shipping Base
# Offloaded with Top Mount, Factory Installed Lifting Lugs
# Best Shipping Dimensions: Up to 12' wide, 20' long, and 9' ceiling
height
Factory Pre-Assembled with Floor
# 10-Year Warranty against Water Penetration
# Offloaded with Top Mount, Factory Installed Lifting Lugs
# Quick Turnkey Product Delivered to Site
# Designed for Concrete Pier Application
# Insulated Floor with high psf capacity
# Standard I-Beam Skid Mounted
# Optional Commercial Grade Tile Overlay
# Optional Plywood for Increased Density and Cushion
# Optional Steel Tread Plate
# Best Shipping Dimensions: Up to 12' wide, 20' long, and 9' ceiling
height
Factory Pre-Wired
# Factory Pre-Assembly required (All wiring is surface mounted)
# Turnkey, Ready to Occupy
# Professionally Installed by Licensed, Experienced Electrician
# Suggested Electrical Packages Available or
# Customer Specified Electrical Packages Installed
E-Cab
# 3’-4’ Wide with up to 16’ Lengths
# Climate Controlled Battery House
# Solves Space Restricted Areas
# Optional Rear Door Access
# 10-Year Warranty against Water Penetration
# Pre-Assembled Floorless or Pre-Assembled with an Insulated Floor
|